: Before assembly, install and then remove the brass standoffs into each hole on layers 3, 4, and 5 to clear any burrs from the cutting process.
: Attach layer 7 to the bottom of layer 6 using four 8mm screws at the bottom front.
features a seven-layer acrylic design with tighter tolerances than previous models.
: Layers 4, 5, and 6 are identical. Install the brass standoffs into layer 6 , then stack layer 5, followed by layers 4 and 3.
: Use the included cotton gloves and microfiber cloth to keep the acrylic clean and free of fingerprints. Assembly Steps :
: If using an acrylic riser, stack the riser layers and secure them with four 20mm screws.