To download and correctly use the firmware, you must download all split parts (e.g., part01, part02, etc.) to reconstruct the original system file. 1. Download & Prepare Files
: Right-click only the first file ( part01.rar ) and select "Extract Here" using WinRAR or 7-Zip . The software will automatically pull data from part02.rar and any subsequent parts to create one complete file, usually a .bin or .img file. 2. Prepare the USB Drive
: Once the LED stops flashing or changes color (usually after 2–5 minutes), unplug the TV, remove the USB drive, and power the TV back on normally. To download and correctly use the firmware, you
: Use a high-quality USB 2.0 flash drive (ideally 4GB to 16GB) formatted to FAT32 .
: Place all downloaded .rar parts into the same folder on your computer. The software will automatically pull data from part02
: The standby LED should begin flashing rapidly, indicating the update is in progress.
If you'd like, I can help you find a where the remaining parts for this AKAI model are hosted. : Use a high-quality USB 2
: You cannot use "part02" alone. Search for and download all required parts (typically .part01.rar , .part02.rar , etc.) from a technician forum such as KenotronTV or similar repair repositories.