Manual Bradford White Mi5036en10 May 2026

: Never turn on the gas or pilot until the tank is completely full. To fill, open the cold-water inlet and several hot water faucets until a steady stream flows without air.

: For proper air flow and servicing, maintain a minimum of 24 inches of clearance in front and 18 inches from the top. Manual Bradford White Mi5036En10

: The thermostat is factory-set to its lowest setting for safety. Use the dial to adjust the temperature; approximately 120°F (49°C) is recommended to reduce the risk of scalding. : Never turn on the gas or pilot

: Follow the specific lighting instructions found on the label attached to the front of your water heater. : The thermostat is factory-set to its lowest

: This model features a Flammable Vapor Ignition Resistant (FVIR) System . If flammable vapors are detected, the system will shut down the burner and pilot automatically. Gas Water Heaters - SERVICE MANUAL

: Install the unit in a level area with adequate drainage to prevent water damage. A drain pan is required if leakage could damage the surrounding area.