: The camera will usually reboot into its normal recording mode once finished. 5. Final Cleanup
Once the camera restarts, go into the settings and again using the camera’s menu. This deletes the update file so the camera doesn't try to reinstall it every time you turn it on. sc24408-C3HDRUpd100052.rar
If the firmware version doesn't exactly match your hardware model, you risk "bricking" the device (making it unusable). If you aren't 100% sure this file is for your specific model, check the device's System Info menu first. : The camera will usually reboot into its
: Use your computer to perform a "Full Format" to ensure the card is clean. 3. Transfer the Firmware This deletes the update file so the camera
Since the file ends in .rar , you need a utility like or WinRAR to open it. Inside, you will usually find a system file with a name like FW96658A.bin or SD_CarCOMS.bin . 2. Prepare the SD Card
Copy the extracted .bin file (not the .rar file itself) directly to the of the SD card. Do not put it inside any folders (like DCIM). 4. Perform the Update Power Off : Ensure the camera is completely off.
: Turn the camera on. Most devices will recognize the file and the screen will stay black or flash a LED for 30–60 seconds. Do not turn it off during this time.