Skip To Main Content

Delta 52 611 Sander Manual (2026)

Slide the table assembly onto the rod and secure it with the secondary socket head screw.

: Must be secured to a workbench or floor; if using a workbench, drill four 3/8-inch holes to permanently bolt the base. 2. Setup and Installation Delta 52 611 Sander Manual

Insert the support rod into the base and tighten the socket head screw. Slide the table assembly onto the rod and

Maintain a minimum clearance of between the table and the sanding belt for safety. if using a workbench

Slide the table assembly onto the rod and secure it with the secondary socket head screw.

: Must be secured to a workbench or floor; if using a workbench, drill four 3/8-inch holes to permanently bolt the base. 2. Setup and Installation

Insert the support rod into the base and tighten the socket head screw.

Maintain a minimum clearance of between the table and the sanding belt for safety.